TATPROF is Russia's leading aluminium profile manufacturer by output35 years in the aluminium marketTechnical support at every stage of your project5,000 tonnes of profile per monthFull production cycle: from casting and extrusion to painting and packingDealer network across all regions of RussiaYour project — our profile
Architectural systems · Facade systems

TFS 50FR

The TFS 50FR system is designed for manufacturing mullion-and-transom translucent facade structures of various configurations with increased fire resistance requirements. The system allows manufacturing curtain wall structures with fire resistance classes EI-15 and EI-30, and interfloor fire-stop belts with classes EI-60 and EIW-60.

The TFS 50FR system is built on the TFS 50 system with an additional set of components and is an integral part of that system.

The required fire resistance is achieved through:

  1. Installation of additional reinforcing aluminium profiles with thermal protection inside the mullion and transom profiles. Heat-shielding elements are used which, thanks to their low thermal conductivity, delay the heating of the reinforcements to critical temperatures.
  2. Fire-resistant structures use only overlapping mullion-to-transom connections fastened with screws and bolts.
  3. Thermo-expanding tape is glued along the length of the profile.
  4. Installation of fire-resistant infill from 10 to 50 mm in 2 mm increments (glass, glass units or sandwich panels with appropriate fire resistance characteristics).
  5. Pressure plates are fastened with self-tapping screws into the reinforcing profile of the embedded part. To retain the infill when the aluminium pressure plate melts, an additional steel pressure plate F50.14.20 is installed. In addition, a stainless steel support is installed together with the aluminium glazing supports, fastened with self-tapping screws into the reinforcing profile of the embedded part.

Thanks to the unification of reinforcing aluminium profiles, the system offers 3 standard sizes. When filling the contour of larger profiles, reinforcing profiles may be joined to each other with self-tapping screws.

In static calculations for wind load on mullion profiles, only the geometric characteristics of the base profile without the reinforcement are taken into account, since the reinforcing profile has no bearing against the walls of the base profile in the plane of the wind load and is fastened to the base profile with self-tapping screws. The degree to which the reinforcing profile is engaged through the screwed connection can be determined by testing. For transom profiles under wind load, when the reinforcement bears against the profile contour, the moment of inertia is determined as the sum of the moments of inertia of the base and reinforcing profiles; otherwise — in the same way as for mullion profiles.

When weight load acts on transom profiles, the moments of inertia of the base profile and the reinforcement in the plane of the weight load are summed, as two-sided bearing is ensured in this direction.

The aluminium profiles of the system are made of alloy 6060 in the T66 temper in accordance with GOST 22233-2018 "Pressed aluminium alloy profiles for enclosing structures. Technical conditions".

Questions and answers

What is TFS 50FR and where is it used?
The TFS 50FR system is designed for manufacturing mullion-and-transom translucent facade structures of various configurations with increased fire resistance requirements. The system allows manufacturing curtain wall … Full production cycle at our own plant in Naberezhnye Chelny.
Where can I get the catalog and technical documentation for TFS 50FR?
PDF files are available on this page in the "Catalogs and documentation" block: TFS 50FR catalog, TFS 50 — album of technical solutions (base system), Fire-stop barrier — album of technical solutions. Files open in a new tab.
How do I get a kit calculation for my project?
Send your specification or drawing via the "Request information" form on the home page or call +7 (8552) 77-85-80: we will select the system and calculate the configuration and lead time within one business day.
Where can I see completed TATPROF projects?
The Portfolio section collects projects across all systems: residential complexes, business centers, sports and public buildings with photos and the series used.